What are the precautions for cutting machine operation

Precautions for using cutting machines

one

Keep the workplace clean. Using electric tools in a disorganized workplace is very effective

Accidents are prone to occur.

two

The workplace environment should be maintained. The workplace should be bright; Electric tools should not be exposed to rain,

Do not use electric tools in damp areas, and do not store paint, adhesives, or steam

Used in oil, diluents, and other flammable and explosive places.

three

The cutting diameter during operation cannot be greater than

50MM

; It must be used at the specified speed. It is strictly prohibited to remove the protective cover.

four

Use safety glasses and wear a mask when dust is flying during work.

five

Pay attention to clothing and wearing.

Wearing clothes with loose cuffs to operate electric tools is very dangerous,

Accidents may occur due to the possibility of being entangled by high-speed rotating gears.

six

Be attentive when operating. When working, it is necessary to stand steadily and maintain the correct balance posture,

During the operation, do not use your hands to cross tools or perform other processing.

seven

Prevention intention

External starting. Before inserting the electrical plug into the socket, the switch should be in the "off" position

Set.

eight

Tools should not be used when fatigued.

nine

During the trial operation, it should be noted that the cutting blades should be checked for completeness, and people should not face the gears directly.

ten

When

When stopping rotation, if abnormal noise or vibration is found, the power should be immediately turned off.

eleven

rise

When moving, inertia force will be generated, so during operation, the tool should be pressed with the right hand and operated with the left hand

Turn on the power switch.

twelve

body

Any part of the body should not be too close to the rotating cutting piece, nor should it touch it.